1.Abdel-Azim, M.N., Al-Brahim, A.M., and Alhamid, A.A. 2002. Combined-free flow over weirs and below gates. J. Hydraul. Res. 40: 3. 359-365.
2.Ackers, P., White, W.R., Perkins, J.A., and Harrison, A.J.M. 1978. Weirs and flumes for flow measurement. John Wiley and Sons Publications, New York, 327p.
3.Alhamid, A.A., Negm, A.M., and Al-Brahim, A.M. 1997. Discharge equation for proposed self-cleaning device. J. King Saud Univ., 9: 1. 13-24.
4.American Society for Testing and Materials (ASTM). 1993. Standard method for open-channel flow measurement of water with thin-plate weirs. ASTM D5242. West Conshohocken, Pa. 250p.
5.Anzani, A. 2014. Experimental investigation of discharge coefficient for curved sharp crested weirs in plan with different central angles. M.Sc. Thesis, GorganUniversity of Agricultural Sciences and Natural Resources, 85p.
6.Aydin, I., Metin Ger, A., and Hincal, O. 2002. Measurement of small discharges in open channels by slit weir. J. Hydraul. Eng. 128: 2. 234-237.
7.Balochi, B., and Zeinivand, M. 2012. Experimental investigation of discharge coefficient for combined structures of weir-orifice in flood conditions. J. Soil Water Sci. 22: 2. 151-164.
(In Persian)
8.Borghei, S.M., Jalili, M.R., and Ghodsian, M. 1999. Discharge coefficient for sharp-crested side weir in subcritical flow. J. Hydraul. Eng. 125: 10. 1051-1056.
9.Bos, M.G. 1989. Discharge measurement structures. International Institute for Land Reclamation and Improvement (ILRI), Wageningen, The Netherlands, 394p.
10.Chadwick, A., and Morfett, J. 1986. Hydraulics in civil engineering. London; Allen and Unwin, 512p.
11.EL-Saiad, A.A., Negam, A.M., and Waheed EL-Din, U. 1995. Simultaneous flow over weirs and below gates. Civil Engineering Research Magazine, 17: 7. 62-71.
12.Esmaeili, K., and Fathi Moqhadam, M. 2006. Discharge coefficient for combined model of weir-gate. 1st National Conference of Management of Irrigation and Drainage Networks, Ahwaz, 8p. (In Persian)
13.French, R.H. 1986. Open Channel Hydraulics. Mc Grow Hill Book Company, New York, 620p.
14.Jan, C.D., Chang, C.J., and Lee, M.H. 2006. Discussion of Design and calibration of compound sharp-crested weir. J. Hydraul. Eng. 132: 8. 868-871.
15.Kindsvater, C.E., and Carter, R.W. 1959. Discharge characteristics of rectangular thin-plate weirs. Trans. Am. Soc. Civ. Eng. 124: 772-822.
16.Lenz, A.T. 1943. Viscosity and surface tension effects on V-notch weir coefficients. Trans. Am. Soc. Civ. Eng. 69: 759-802.
17.Martinez, J., Reca, J., Morillas, M.T., and Lopez, J.G. 2005. Design and calibration of a compound sharp-crested weir. J. Hydraul. Eng. 131: 2. 112-116.
18.Munson, B.R., Young, D.F., and Okiishi, T.H. 1998. Fundamentals of flows mechanics. Wiley and Sons, New York, 853p.
19.Negm, A.M., Albarahim, A.M., and Alhamid, A.A. 2002. Combined free flow over weirs and gate. J. Hydraul. Res. 40: 3. 359-365.
20.Negm, A.M. 1995. Characteristics of combined flow over weirs and under gate with unequal contractions. 2nd Int. Conf. on Hydro-Science and Engineering, Beijing, China, 8p.
21.Negm, A.M. 2000. Characteristics of simultaneous overflow–submerged underflow: unequal contractions. Engineering Bulletin, 35: 1. 137-154.
22.Pesaraklo, M., and Emadi, A. 2014. The experimental investigation of combined flow in sharp crested weir and gate in the state of compound weir. The 2nd National Conference on Water, Human and Land, 8p. (In Persian)
23.Piratheepan, M., Winston, N.E.F., and Pathirana, K.P.P. 2006. Discharge measurements in open channels using compound sharp-crested weirs. J. Inst. Engin. 3: 31-38.
24.Rajaratnam, N. 1977. Free flow immediately below sluice gates. J. Hydraul. Div.
103: 4. 345-351.
25.Ramamurthy, A.S., Tadayon, R., and Chen, Z. 2009. Numerical simulation of sharp-crested weir flow. J. Can. Civil Eng. 36: 9. 1530-1534.
26.Razavian, H., and Heidarpour, M. 2007. The investigation of discharge coefficient for combined model of the sharp crested weir-orifice. The 6th Iranian hydraulic conference, ShahrekordUniversity, 9p. (In Persian)
27.Shahabi, M., Bidokhti, N., Dehghani, A.A., and Telvari, A. 2011. Experimental investigation of flow contraction on scour cone downstream of weir-gate structure. 6th National Civil Engineering Congress, Semnan University, Iran, 10p. (In Persian)
28.Shirdeli, A. 2006. Discharge coefficient of rectangular openings in submerged condition and free. The National Conference Management of Irrigation and Drainage Networks, ShahidChamranUniversity of Ahwaz, 10p. (In Persian)
29.Swamee, P.K., Ojha, C.S.P., and Kumar, S. 1998. Discharge equation for rectangular slots.
J. Hydraul. Eng. 124: 9. 973-974.
30.Swamee, P.K., Pathak, S.K., and Ghodsian, M. 2001. Viscosity and surface tension effects on rectangular weirs. ISH J. Hydraul. Eng. 7: 2. 45-50.
31.United States Bureau of Reclamation (USBR). 1963. Compound weir study. Hydraulic Laboratory Report No. Hyd. 505, 35p.
32.United States Bureau of Reclamation (USBR). 1997. Water measurement manual. 3rd Ed. Denver, 317p.
33.Yasi, M., and Abbaspour, A. 2005. Flow over sharp-crested, truncated-triangular weirs.
Sci. J. Agric. 28: 2. 165-181. (In Persian)
34.Zahiri, A. 2012. Quasi-two dimensional mathematical model for prediction of flow discharge over compound sharp-crested weirs. J. Water Soil Cons. 19: 3. 25-47. (In Persian)
35.Zahiri, A., Tang, X., and Azamatulla, H. 2014. Mathematical modeling of flow discharge over compound sharp-crested weirs. J. Hydro-Environ. Res. 8: 3. 194-199.