نوع مقاله : مقاله کامل علمی پژوهشی
نویسندگان
1 دانشجوی دکتری علوم خاک دانشگاه تبریز
2 دانشجوی دکتری گروه علوم خاک دانشگاه تهران
3 Associate Professor, Department of soil science, University of Guilan
چکیده
کلیدواژهها
عنوان مقاله [English]
نویسندگان [English]
Background and Objective: Direct measurement of some soil properties may be difficult, costly and time consuming. So, these properties can be predicted usefully using easily available data. Soil cation exchange capacity (CEC) is a vital indicator of soil fertility and pollutant sequestration capacity. Soil hydrodynamic properties drive the flow of water in the soil-plant-atmosphere system, and hence control processes such as aquifer recharge or nutrient fluxes between soil and vegetation. Knowledge of soil hydrodynamics is important for modeling physical processes related to soil water content. Despite great advances in measurement methods, it is still difficult to determine soil hydraulic properties accurately, especially for undisturbed soils and in the dry range. However, the measurement of the soil hydraulic properties and CEC is time-consuming, labor-intensive and expensive. That is why, the present study aimed to develop pedotransfer functions (PTFs) for the estimation of field capacity (FC), permanent wilting point (PWP), and CEC of the soils of Guilan province.
Materials and Methods: Study area is located in south of Guilan Province, Gilevan region, northern Iran. The climate is aridic. The annual precipitation is 245 mm, and the average temperature is 18 °C. A total of 240 soil samples from 0-30 cm layer of this region were collected. Then, both difficulty and easily available properties such as clay, sand and silt percent, CaCO3, organic matter, bulk density and gypsum were measured. The first step for using statistical methods is to study the normality of data. In order to know whether the data were normal, Kolmogorov-Smirnov test was used. Data were divided into two groups of test (%25) and train (%75). This division carried out in such a way that statistical characteristics of two groups such as minimum, maximum, standard deviation, etc. were similar. Then regression and artifitial neural network (ANN) models set on training data. For prevention of error in ANN process, data converted in standard scale from 0.1 to 0.9. Multi-layer percepteron, feed forward backpropagation, and Levenberg-Marquardt functions were used for extension of ANN. Relative root mean square error (RMSE), determination coefficient (R2) and model efficiency factor (MEF) criteria were used for evaluation of models.
Results: In regression analysis, for CEC, clay and organic matter percent, in FC moisture content, clay, silt as well as bulk density, and for PWP, clay percent showed significant effects in created models. Coefficients of determination in created linear models for CEC, FC and PWP were 0.72, 0.84 and 0.73, respectively.While these coefficients for non-linear models were 0.78, 0.87 and 0.74 for CEC, FC and PWP, respectively. The best PTFs for prediction of difficulty available properties in ANN obtained by multi-layer perceptron model with 2 hidden layers, 8 neurons for FC and PWP, 6 neurons for CEC and considering all inputs. Coefficients of determination for CEC, FC and PWP were 0.98, 0.99 and 0.98, respectively. ANNs designed for prediction of difficulty available properties with inputs include soil easily available properties that have the most sensitivity coefficient with difficulty available property. Test results of these models were similarity non-linear regression models. The results of models compared with test data showed that the models obtained from ANNs were more accurate than the regression model.
Conclusion: In regression method, non-linear models for prediction of soil difficulty available properties were more accurate than linear models. In ANNs, models with inputs including all of the soil easily available properties were more accurate than models with inputs include soil easily available properties that have the most sensitivity coefficient with difficulty available property.
کلیدواژهها [English]
)