TY - JOUR
ID - 4942
TI - The study of Effect of Relative Diameter and depth of installation of Lattice Collar on Scouring around Airfoil Bridge Piers
JO - Journal of Water and Soil Conservation
JA - JWSC
LA - en
SN - 2322-2069
AU - Kamanbedast, Amirabbas
AU - Mohammadian, Alireza
AU - Bordbar, Amin
AU - Masjedi, Alireza
AU - Heidarnejad, Mohammad
AD - IAU,Ahvaz
AD - -Department of Water Science and Engineering, Ahvaz Branch, Islamic Azad University, Ahvaz, Iran
AD - iau,ahvaz
AD - Islamic Azad University
Y1 - 2020
PY - 2020
VL - 26
IS - 6
SP - 159
EP - 177
KW - Bridge pier
KW - airfoils
KW - lattice collar
KW - physical model
KW - scouring
DO - 10.22069/jwsc.2019.15706.3090
N2 - Scouring is one of the main reasons for the failure of bridges in the United States and the world. The flow characteristics, the base shape and the angle of its deposition relative to the flow and characteristics of the sediments are all factors that interfere with the complexity of the scouring problem of bridge bridges. It should be noted that the final scour depth created near the bridge base is equal to the total erosion depth due to local, general, and narrowing of the flow width. Determining the depth of erosion within the range of bases requires knowledge of the displacement of sedimentary materials in the river bed. The bases disrupt the normal flow of the river, and the turbulence and disturbances resulting from it erode sedimentary materials around the base. Since the propagation of the scour hole threatens the stability of bridge structure, a common engineering practice in the field of river engineering involves the prediction of scour depth to take necessary controlling measures. Accordingly, this study aimed at investigating the effect of air foil lattice collars on airfoil bridge piers. According to the results, scouring decreased further with increasing collar length. By installing lattice collars with a length (L/D) of 6, 8, and 10 at a relative depth (Z/D) of 0.1, scouring reduced by 16.6, 22.3 and 24.7%, respectively, compared with a collarless bridge pier. By installing lattice collars with a length (L/D) of 6, 8, and 10 at a relative depth (Z/D) of 0.5, scouring reduced by 35.2, 37.4 and 38.4%, respectively, compared with a collarless bridge pier. By installing lattice collars with a length (L/D) of 6, 8, and 10 at a relative depth (Z/D) of 1, scouring reduced by 27.7, 31.6 and 31.4%, respectively, compared with a collarless bridge pier. Scouring increased by 113.8% on average by increasing the relative velocity (V/Vc) from 0.54 to 0.95. By installing the collar at a relative depth (Z / D) of 0.1, 0.5 and 1, we see 16.6, 35.2 and 27.7 percent lower scouring than the collar less base. Also, by increasing the depth of the lattice aerodynamic collars (Z / D) from 0.1 to 0.5, the scour reduction decreased by 22.3% and also with increasing the depth of the lattice aerodynamic collars (Z / D) from 0.5 to 1, increasing the scour 11.6 percent. In this way, it can be seen that the best depth of the collar is about half the diameter of the base of the bridge. Also, simulation with the Flow-3D math model is close to the physical model, with an average of only 5.4% error, which is acceptable.
UR - https://jwsc.gau.ac.ir/article_4942.html
L1 - https://jwsc.gau.ac.ir/article_4942_fb4822ff32266251591c873e7ede8071.pdf
ER -